- 296
- 282 673
Not Just Sawdust
Portugal
Приєднався 21 бер 2013
The Dutchman who, 17 years ago, turned an old ruin into a workshop at a lonesome hill in Central Portugal starts all over again. The meandering paths away from that straight highway, leading to the unavoidable coffin, made him see the most breathtaking views, pass the dark corners of society and brought numerous kinds of unexpected encounters with the good and the bad. A, not always understood, but inexhaustible and relentless creativity made him enthusiastic for 12 trades, resulting in 13 accidents before realizing that one doesn't need to travel on ready made roads.
The rock 'n' roll hair was cut a while ago, the bandanna's dropped in the big bin of rags, blue suede shoes were exchanged for steel-nosed boots. The 300-year-old workshop was sold and a new adventure started in the Barbacena Backyard. This Alentejo adventure is shared on this channel. Building a new workshop, woodworking, recycling and the making of alternative instruments!
The rock 'n' roll hair was cut a while ago, the bandanna's dropped in the big bin of rags, blue suede shoes were exchanged for steel-nosed boots. The 300-year-old workshop was sold and a new adventure started in the Barbacena Backyard. This Alentejo adventure is shared on this channel. Building a new workshop, woodworking, recycling and the making of alternative instruments!
Finishing a A wall-to-wall display cabinet out of only OSB (part 3)
#osb #furnituredesign #displaycabinet
Finally a finished project. The Wall to wall display cabinet is ready. You could say it was a struggle! Our excuses for the few scenes that seem a bit yellow in colour. Tip: When you start using a new camera, remove the protection sheet on the lens!
A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust
Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the proverbial blood of that beautiful material nature provides us with. It's the sharp teeth that cut, the subdued mind that finds out what a piece of wood harbours in itself.
You can follow the projects we're working on at:
www.notjustsawdust.com
NotJustSawdust
lumberjocks.com/Serradura
www.pinterest.com/NaoSoSerradura/
NotJustSawdust
3xchaos.weebly.com/
cigarboxnation.com/profile/GerritKlaassen
handmademusic.ning.com/profile/GerritKlaassen
and for lots of projects, we don't make videos of, at notjustsawdust
Disclaimer: This channel and videos are intended for entertainment and inspiration only. Woodworking is and can be very DANGEROUS. DO NOT ATTEMPT any silly techniques I use, simply because you've seen it in one of my videos!
Finally a finished project. The Wall to wall display cabinet is ready. You could say it was a struggle! Our excuses for the few scenes that seem a bit yellow in colour. Tip: When you start using a new camera, remove the protection sheet on the lens!
A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust
Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the proverbial blood of that beautiful material nature provides us with. It's the sharp teeth that cut, the subdued mind that finds out what a piece of wood harbours in itself.
You can follow the projects we're working on at:
www.notjustsawdust.com
NotJustSawdust
lumberjocks.com/Serradura
www.pinterest.com/NaoSoSerradura/
NotJustSawdust
3xchaos.weebly.com/
cigarboxnation.com/profile/GerritKlaassen
handmademusic.ning.com/profile/GerritKlaassen
and for lots of projects, we don't make videos of, at notjustsawdust
Disclaimer: This channel and videos are intended for entertainment and inspiration only. Woodworking is and can be very DANGEROUS. DO NOT ATTEMPT any silly techniques I use, simply because you've seen it in one of my videos!
Переглядів: 166
Відео
making a wall-to-wall display cabinet out of only OSB, part 2
Переглядів 182Місяць тому
#osb #furnituredesign #displaycabinet Making a wall-to wall display cabinet (380cm). Part 2: shelves A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the proverbial blood of that beautiful material nature provides us with. It's t...
Making a wall-to-wall display cabinet, with only OSB, Part 1
Переглядів 134Місяць тому
#osb #furnituredesign #displaycabinet Making a wall-to-wall display cabinet with only (2nd grade 12mm.) OSB sheets. Part 1: preparations, insulation and back wall installation. A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the...
Our new Hall of Fame. Warning: Blues Alert!!
Переглядів 189Місяць тому
#portrait #blues #hallwayideas How do you hang up 68 portraits safely in a small hallway? We solved it in our own way. A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the proverbial blood of that beautiful material nature provid...
Recycling an old Ikea table into an editing desk (and about 38 sheets of OSB)
Переглядів 2872 місяці тому
#recycling #ikea #OSB To make videos, one needs a place to edit them. This time we recycle an old Ikea diner table into an audio/video editing station. Oh... and then there were 38 sheets of OSB! A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless ...
New beginnings, back in business. unpacking a new table saw.
Переглядів 2892 місяці тому
It's time for a new start. After a few months of taking a break to make our new house into a home, we're back. As for reasons concerning the amount of electrical power in the workshop, we had to find a replacement for the good old Metabo table saw that seems to be overpowered for our new workshop to be.... A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawd...
Review VONROC 20V after 3 years, and unpacking a few new tools.
Переглядів 1,4 тис.6 місяців тому
#review #vonroc #alentejo I have been using different VONROC tools for more than 3 years now. Time to review their quality and endurance. A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the proverbial blood of that beautiful mat...
Saying goodbye to the old workshop, starting all over in 2024
Переглядів 4056 місяців тому
#relocation #workshop #portugal The first video of 2024. We wish you all a peaceful, creative, and healthy New Year. This video is the final goodbye to the old workshop on the lonesome hill. At last, we are settling at a new location... the workshop is going to rise in the Barbacena Backyard! A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just S...
A trip to the new workshop to be... just an update on the adventure!
Переглядів 2867 місяців тому
#relocation #portugal #workshop Finally, we are moving belongings to the new property. This is just a little "road movie" and the first footage of the old shed that needs to become the new Not Just Sawdust workshop. Oh, yes, it will take a while before we can take on the replacement of the roof, (we'll have to wait until spring) but there's so much more to do! A big thanks to our Patrons! Have ...
Relocating in Portugal. Vlog 4, transporting the first boxes to a storage place.
Переглядів 2568 місяців тому
#relocation #portugal #roadmovie Time travels going fast when all things need to be done at the same time. The deadline is on the horizon so we are transporting all our belongings to a storage place, kindly provided by some good friends. This is just a little speedup video on the route we will have to take many times! A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com...
Moving a workshop in Portugal. Vlog nr.3 Things are being collected.
Переглядів 2248 місяців тому
#relocation #portugal #workshop As the relocation of the workshop is just a few weeks away, it is time to invite friends to collect some of the materials and tools we will (can't) take with us to our new property. A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecti...
Vlog: Moving out of the workshop Part 2 - more demolition!
Переглядів 1998 місяців тому
#relocation #workshop #portugal Yes, we are still packing and making decisions about what to take with us and what needs to stay behind. Vlog nr. 2 about our move within Portugal. A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, ...
Vlog: Moving a workshop in Portugal, the ins and outs of packing up! Part 1
Переглядів 2768 місяців тому
#portugal #relocation #workshop The coming videos will be all about packing up and making decisions. What us going with us to the workshop, what do we leave behind? A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the relentless urge to create, the proverbial ...
The last project out of the workshop, making 2 guitar cases, part 2
Переглядів 1859 місяців тому
#guitarcase #recycling #woodworking Part 2 of making two cases for recycled box guitars. The last video while actually making an item in our Not Just Sawdust workshop on the lonesome hill. Soon we will move.... what the future will bring us, well, for sure another workshop! A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serr...
The last project ever out of the workshop; 2 guitar cases (part 1)
Переглядів 2709 місяців тому
Yes, this is the last project ever that will be produced in the workshop upon the Lonesome hill! We are going to move. Where we end up, we don't know yet.... Making 2 guitar cases for recycled box guitars. A big thanks to our Patrons! Have a look at our Patreon site: www.patreon.com/notjustsawdust Not Just Sawdust, Não Só Serradura, because it isn't just that. It's the evidence reflecting the r...
Reupholstering driver side door and a safety feature for the Iveco van.
Переглядів 146Рік тому
Reupholstering driver side door and a safety feature for the Iveco van.
A new design for the Iveco Van doors (and new lock and handle)
Переглядів 240Рік тому
A new design for the Iveco Van doors (and new lock and handle)
Looking for that workshop mojo! (installing a diesel heater)
Переглядів 209Рік тому
Looking for that workshop mojo! (installing a diesel heater)
Not Just Sawdust, update from the lonesome hill (sorry for bad audio quality)
Переглядів 199Рік тому
Not Just Sawdust, update from the lonesome hill (sorry for bad audio quality)
The Iveco Conversion - The maiden voyage part 2
Переглядів 155Рік тому
The Iveco Conversion - The maiden voyage part 2
The Iveco conversion: The Maiden Voyage, camping in the Alentejo.
Переглядів 162Рік тому
The Iveco conversion: The Maiden Voyage, camping in the Alentejo.
The Iveco conversion part 16: Mounting the awning profiles and other small bits
Переглядів 157Рік тому
The Iveco conversion part 16: Mounting the awning profiles and other small bits
The Iveco conversion part 15: curtains, back door panel and still not done!
Переглядів 163Рік тому
The Iveco conversion part 15: curtains, back door panel and still not done!
The Iveco Conversion part 14: drawers, shelves and insulating the doors.
Переглядів 128Рік тому
The Iveco Conversion part 14: drawers, shelves and insulating the doors.
The Iveco Conversion part 13: Battery box and passenger side wall from reclaimed materials.
Переглядів 185Рік тому
The Iveco Conversion part 13: Battery box and passenger side wall from reclaimed materials.
The Iveco Conversion part 12: Making a mobile kitchen unit.
Переглядів 134Рік тому
The Iveco Conversion part 12: Making a mobile kitchen unit.
The Iveco Conversion, Part 11: A well working chaos! (installing solar power)
Переглядів 111Рік тому
The Iveco Conversion, Part 11: A well working chaos! (installing solar power)
The Iveco Conversion part 10: A ceiling out of reclaimed wood!
Переглядів 162Рік тому
The Iveco Conversion part 10: A ceiling out of reclaimed wood!
The Iveco conversion. Part 9: Making a wall cabinet with sliding doors, drawers and a fan.
Переглядів 166Рік тому
The Iveco conversion. Part 9: Making a wall cabinet with sliding doors, drawers and a fan.
The Iveco Conversion part 8: Wheel arch cover boxes and bed frame (out of reclaimed wood)
Переглядів 153Рік тому
The Iveco Conversion part 8: Wheel arch cover boxes and bed frame (out of reclaimed wood)
i m building one,your video is really useful,thanks for sharing!!
Toy boats...didn't see that one coming 😊
Wow that is great. thanks
Great jig. Thanks for the video.
That looks fantastic Gerrit. I would never think that it was made from cheap OSB. Great series and looking forward to your next video my friend. Take care Gerrit. Cheers, Huw
Very impressive planning and work Gerrit. The end result is magnificent. PS. I'm sorry for not getting back to you sooner. I found a bottle of Gin in the supermarket today and it's been so long I've treated myself to a gin and tonic I couldn't resist. LOL.
Gerrit, you've come quite a way from LumberJocks postings! LOL! Nice subscription numbers! There's a sayin that you cn't make a silk purse from a sow's ears. You're the exception. LOL! Nice save on the OSB cabinet!
That is looking so cool Gerrit! Very nice work as always. Cheers 🤗
Look at all those cycling trophies - you're a constant surprise mate! And I really want to see those boats on the water again some day. I'm off to get a cool drink - watching the Wooly Wonder painting in 40C has made me mighty thirsty. Thanks and all our love.
I'm notified, I watch. It's that simple..
Yep
Good work from less than ideal material mate!
It's looking good so far, you have done great with what you have.
Love the sound and music choices. Have some of that very poor OSB. It sucks!
That's looking very smart mate, I really like the dark colour. Shame about the low quality material but you seem to have managed to work round it. I'm intrigued by the boats, I don't remember having seen these before. Cheers mate and love to you both.
Thanks Mark! The model boats all have been in storage for over 20 years... they all need repairs! But hey... it means I can never say there are no projects on the shelves!!
Hi Gerrit, You my not be happy with the quality of the OSB but you have made it look really great. Love the music once gain. Take care my friend. Cheers, Huw
Indeed Huw, I'm not happy with the quality. (Maybe I should have been warned when finding a company that sells by the pallet, way cheaper than the others) Using the filler, I found at a local DIY store, extensively on the edges and than send it down again, makes it all workout fine. Now working on the sliding doors, finished project in next weeks video!
Cool work man
great job as always. i hope the new house ispire you like the old one
Vonroc has been the worst tool I've ever bought. Never again.
I'm sorry you have a different experience than Me (and many others). I am using these (CHEAP) tools on a daily bases, and after more than 3 years they are still doing the job. Except for both types of jigsaws, all the 20 volt tools are living up to my expectations. Of course you can not compare a 35 Euro tool with one that costs 350 Euro. (Although in many cases they hold up pretty good compared to expensive brands)
Hi Gerrit, That looks like a really well planned out display unit. Looking forward to Part 2. Music excellent as usual. Take care my friend. Cheers, Huw
Great project and the soundtrack was great
Doin what you can with what you have. I'm using 5 ply fir plywood to make shelving for clothes storage.
Good job Gerrit. I love OSB. It is so versatile.
I love work - I can watch people doing it for hours. And especially when it has such a brilliantly chosen sound track. Your videos always make me wish I known about your radio programme. Cheers mate, love to you both as always.
Nice video Gerrit! Thanks for sharing with us!💖👍😎JP
That is a unique hallway!
What a fantastic way to display all the photographs. So simple but so effective. Great video my my friend and amazing music as well. Take care Gerrit. Cheers, Huw
Not only a simple solution, Huw. It's also a safe way to make sure they don't stick out in such a narrow hallway. All the best from PT.
That Harald Nyborg box must be a rare one in your area,,, Very local Danish shop.
Sorry, maar ik heb geen idee wat je bedoeld....
@@NotJustSawdust The moving boxes in the background where you have the table saw. They are from a Danish hardware chain - only one shop outside Denmark and that is in Sweden. They have been around in the world - ended up in a good place!
@@hookedonwood5830 Oh, I see! Yes these boxes have been past on multiple times for moving internationally. We got them from friends who moved over here to Portugal from The Neterlands (as we did 17 years ago). Most of the boxes are at the end of their usability....
Welcome back mate, great to be getting set up and settled in
Thanks! For now it's just putting a camera on and register what I'm doing, so there won't be specific projects that will get finished at the end of the video. The garden will come last (after rebuilding the workshop) so you won't see me cutting grass 😉. All the best from the Barbacena Backyard.
Ya got yo funk on bro! Lots of folk I did't know. Looked for Jimmy Rushing? Loved the music background!
Jimmy Rushing died in 1972, Thomas, these series of photo's was made in 1998 by Jeff Dunas.. so there's more famous and less famous artists missing in the series. There are however more photo's framed, but no more space in the hallway.
Awesome Gerrit! Love it. Have to see it "in situ"
Welcome anytime, You know!!
WOW!!!!! What a fabulous collection of pictures. You've got to tell us the story of how you've got all these pictures. And as usual I've got to watch once to see the vid and three or four times to listen to the music. Cheers Gerrit.
Thanks Mark! Now you See why we are moving around 50 cubic meters of personal stuff when we move house 😉😃
It’s a large selection of the blues on the wall Gerrit. Looks great
Great looking up-cycle 🛠👍😊
Welcome back mate. Nice looking little courtyard and new saw. Good rack'n'pinion fence on it should be pretty sturdy.
Hi Gerrit, If I hadn't watched you cut up the old table I would have said your desk was brand new. Fantastic Gerrit. Take care my friend. Cheers, Huw
Thanks Huw. I think it was a great find in the shed. It's just particle board but the lamination is solid and I was able to cut it in a way the edges were facing to the front. Still some work to do on it, but that's for some future videos.
Good vid Gerrit, very enjoyable. I like those board-carrying hook things and I really enjoyed that bossa nova style tune that strats about 8:30. Cheers mate; I can't tell you how good it is to see you back doing what you do so well. Love to the Wonder of Wool.
Thanks Mark. I guess the "wonder of wool" is known as the Patron of paint by now! You know all my music comes from the youtube library and is mentioned above somewhere. Free to download!
Music room first!! Talking my language mate!
Nice reuse Garrett, good to have assistance. LOL! Hoping your viewing public grows.
Thanks Thomas! Yes it's great to work under "supervision". As of now we're trying to keep to a schedule of uploading a video every Wednesday.
1st 😂😂😂😂
Very nice looking saw Gerrit. Great to see you back and to listen to your amazing choice of music. Looking forward to seeing more videos my friend. Take care Gerrit. Cheers, Huw
Thanks Huw! I hope to upload a video every wednesday from now on. First finishing the "music room" and a than hopefully the complete process of rebuilding a workshop. All the best from the Alentejo!
🛠👍😊
I miss see you, glad to see you again. 👍👋
i'm glad you are back my friends i have missed you,wife and of course the dog,I have enjoyed you from the start at your last shop hope you and your family are healthy and happy,very nice new place,it would be great to see your boat models have you ever did a ship in a bottle
Great to her from you Ron! It´s going to take some time before we start on the new workshop, but the house is getting to completion, and is slowly growing into a home. I never did a ship in a bottle (and I guess nowadays I would have to put three glasses over each other to see any such small details). The modelboats are mostly RC models made from scratch, and will get a place on the cabinets in the music room, some of them needing an extended restoration... All the best to you an yours, from the Barbacena backyard!
Hey Garrett! Things we had we don't have now. Used to have a local place we could dump trash but city decided to get cheaper contract. Have you heard George Carlen's piece called "Stuff!" Good to see your smiling face!
Hey Thomas, Yes, it took a while to settle in and find my way around local shops and suppliers. As for burocracy... well, it's the eternal fight against the cheapest options (for the government that is). As for our selves, we have a great courtyard, and what happens in the Barbacena backyard, stays in the Barbacena backyard.. oh and with the viewers who watch this channel of course!
Hello Gerrit, nice to see you again. Congratulations on your new table saw. keep doing the good work. I hope everything is okay. See you later. Big greetings.
It's good to be back! I hope everything is well over there! I don't hear a lot of news from my friends in Mut and Topluca. The table saw works good. (now I need to make new jigs for it) All the best from PT
Welcome back man
Gerritttttttt!!!!!!! So good to see you back in front of the camera again! All our love to you both and I'm looking forward to watching the development of the All New NJS Workshop. (And I love that outro music - excellent choice.)
Thanks Mark! I will take the "All New Workshop" with a touch of salt (as we say in Dutch), You know me.... there won't be much "new" involved. (Although the roof will probably be just that... shiny and new).
Welcome back, Gerrit. You have been missed. It looks as though you have your mojo back. Love to you all.
Don´t know about the old creative mojo yet, but we're getting there Phil. Still improvising while working outside...
Hi I am restoring an exact curved glass cabinet, took off the trims.from inside glass but now can't put them back because they are very narrow, don't know how to secure the glass now. Can you please suggest
I would use some hot glue to mount the glass, after that find some kind of solution to install a littke strip. (even if its only with some silicone glue)